How to clean, disinfect and sterilize medical equipment

53 views

How to clean, disinfect and sterilize medical equipment - Certain medical equipment is disposable, such as gloves and needles, but it is not financially possible to have more expensive medical equipment between uses. To prevent the spread of disease between patients, reusable medical equipment should always be cleaned, disinfected and sterilized before it can be used again. Once properly sterilized medical equipment will be completely free of microscopic virus and bacteria.

How to clean, disinfect and sterilize medical equipment

How to clean, disinfect and sterilize medical equipment

How to clean, disinfect and sterilize medical equipment

• Place a clean pair of disposable latex gloves. You must wear protective gloves when handling dirty medical equipment.

• Remove all visible contaminants using a cotton swab moistened with rubbing alcohol. If you spend a few minutes using a cotton swab to clean the large organic matter or blood stains, visible from the start, it will be much easier for the disinfection of equipment and sterilization to do its work in the next stages .

• Place the contaminated material in an ultrasonic bath filled with disinfectant solution. Close the lid and turn on the ultrasonic bath. Ultrasonic baths use powerful ultrasonic waves to clean scrub equipment, eliminating even smaller amounts of blood, saliva or other contaminants.

• Remove equipment from the ultrasound machine after about 15 minutes.

• Rinse equipment with clean water. If the ultrasound disinfecting solution is not rinsed medical tools, the solution may discolor the unit over time. The discoloration is not harmful but is unsightly.

• Dry the product using disposable paper towels.

• Place the equipment in bags made of the self-sealing autoclave, which is strong vessel, under pressure, steam heated, as for laboratory experiments, sterilization or cooking.

• Place the material bagged in an autoclave machine, a device to sterilize equipment and supplies by subjecting them to high-pressure steam at 121 degrees centigrade or more, generally for 15 to 20 minutes depending on the size of the load and content. According to medical supplies and Equipment Company, autoclave sterilization is the best available method for the sterilization of medical equipment. Once cleaned and disinfected, autoclaved sterilization will complete obliteration of any remaining germs.

• Turn on the machine from the autoclave.

• Remove the medical tools once the machine has gone through its entire operation and cooling period. Do not remove the tools sticky bags immediately before use. During the cleaning process in an autoclave, the vacuum sealed bags themselves. If you open the bags, you risk exposing airborne contaminants tools.

Tips & Warnings from The Best Guide

Never remove medical tools of an autoclave before cooling time is extinguished. Autoclaves use hot steam to kill bacteria, and removing the medical equipment before the end of the cooling period can cause severe burns.

How to clean, disinfect and sterilize medical equipment

Tags: #disinfect and sterilize medical equipment #How to clean